Good Morning,
We are in the process of getting permit for new construction of and in ground pool and I have a question about lighting. We would like to add 3 Pentair 12v led color pool lights and 2 12v color cascade bubblers. I would like to have them all coordinated together using Pentair intellibrite controller. No other automation at this time. My concern is the additional resistance from the length of wire needed for the bubblers and lights. We will need 150 ft for bother bubblers, 150 ft for 2 pool lights and 100 ft for the third pool light. Will a 300 watt transformer work or do I need 100 watt transformer for each light and bubblers, seeing that the wire length for each one is over 100 ft? How would the electrical diagram look and will the intellibrite controller be able to control 5 separate 100 watt transformers. I believe I read that the intellibrite controller is rated 300 watts max. I called Pentair support they weren’t helpful ( could be due to my ignorance ). I also sent these questions via email to Pentair asking for their help and haven’t heard from them; its was sent early last week. On their web they attempt to get back with you in 72hrs. So far nothing. I’m not an electrician, as you can see. I’m just looking for a better understanding. I want to make sure we don’t run into any problems. My PB has never setup lights like these before; he installs standard pool lights. So he’s not much help here.
Power source(120)---------intellibrite controller(120)--------------------(100watt)transformer(12v) ( possible 5 )-------------lights/bubblers(12v).
Would I need a junction box between the intellibrite controller and all those step down transformers?
-or-
Power source(120) ----intellbrite controller(120)---------300 watt transformer(12v) ------lights/bubblers(12v).
Anyone with any insights would be greatly appreciated.
Maybe I’m making this harder then what it is and the length of wire isn't a concern?
Thanks
We are in the process of getting permit for new construction of and in ground pool and I have a question about lighting. We would like to add 3 Pentair 12v led color pool lights and 2 12v color cascade bubblers. I would like to have them all coordinated together using Pentair intellibrite controller. No other automation at this time. My concern is the additional resistance from the length of wire needed for the bubblers and lights. We will need 150 ft for bother bubblers, 150 ft for 2 pool lights and 100 ft for the third pool light. Will a 300 watt transformer work or do I need 100 watt transformer for each light and bubblers, seeing that the wire length for each one is over 100 ft? How would the electrical diagram look and will the intellibrite controller be able to control 5 separate 100 watt transformers. I believe I read that the intellibrite controller is rated 300 watts max. I called Pentair support they weren’t helpful ( could be due to my ignorance ). I also sent these questions via email to Pentair asking for their help and haven’t heard from them; its was sent early last week. On their web they attempt to get back with you in 72hrs. So far nothing. I’m not an electrician, as you can see. I’m just looking for a better understanding. I want to make sure we don’t run into any problems. My PB has never setup lights like these before; he installs standard pool lights. So he’s not much help here.
Power source(120)---------intellibrite controller(120)--------------------(100watt)transformer(12v) ( possible 5 )-------------lights/bubblers(12v).
Would I need a junction box between the intellibrite controller and all those step down transformers?
-or-
Power source(120) ----intellbrite controller(120)---------300 watt transformer(12v) ------lights/bubblers(12v).
Anyone with any insights would be greatly appreciated.
Maybe I’m making this harder then what it is and the length of wire isn't a concern?
Thanks