-- I was a little slow on this one I see, but will leave my comments that mimic those above --
How does the water look?
I would recommend you check the CH ... while low is not a problem for a vinyl pool, high can cause issues.
You TA is a little high, all this will do is cause the pH to rise more rapidly. If you keep your pH in check, the TA should come down.
Now the bigger issues:
Obviously your CYA is about double what we recommend, so either replace half the water, or make sure your FC never drops below 6 ppm.
BUT,
With a CC reading of 1 ppm, that usually means there is something in the pool that would require you to go through the shock process.
Since your CYA is so high, your shock FC level is 31 ppm according to Pool School.
So, you have to decided, shock process at high CYA & FC -OR- replace water and shock process at lower CYA & FC levels