Update: During the draining process I managed to run my pump dry because I left the pool cleaner on and it must have gotten stuck above the water line. I should have just used the "drain" to drain the pool. So, yesterday I slapped on a spare pump I had and I'm back up and running.
Current Parameters:
FC 0
CYA 40
TA 80
PH 8.2
After testing I cleaned the filter, vacuumed, and slowly poured in what little acid I had. It is not going to be enough to lower the PH to 7.2 so I am headed out to get some more acid. How long should I wait to test ph and add more acid?