I have an aqua rite salt system that is reading about 4400-4600 ppm salt. So I take a sample to leslies and their electronic probe is reading 2800 ppm. They even checked their own sample to confirm that their device was callibrated correctly.
I cleaned the cell/ no change. The salt level definatly did not taste like 4400ppm when I was in the other day. How do I force the unit to read the current salt level at 2800 ppm? Even with the high reading the system is still producing chlorine.
I cleaned the cell/ no change. The salt level definatly did not taste like 4400ppm when I was in the other day. How do I force the unit to read the current salt level at 2800 ppm? Even with the high reading the system is still producing chlorine.