I have an 8500gallon in groun diamond brite pool with a 2y 10moth aquarite aqr arrid climate T-3 15k cell. After all the rain from Tropical storm Isaac I was getting check cell, low salt. My salt reading was 2400 before all the rain. I cleaned the cell in muratic acid 1 to 4 parts as it had some scalling despite cleaning it less than 3months ago. I added 40lbs and had the salt tested at Pinch with a 3300 reading since the system kept erring. I pressed diagnostic for 3 seconds and also tried the salt reading cycle by waiting till the system clicks and pressing the diagnostic 5x. I get no reading and the following:
1)0
2)85 temp
3)30.9
4)100p or 75p
5)-0
6) Al-0
7)v1.55
8) T-3
Does this mean I need a new cell or did I not add enough salt and Pich a Pennies reading of 3300 is off? I called aquarite but I have been working past 5pm and they close so I only had the readings above to give but I was not home.
1)0
2)85 temp
3)30.9
4)100p or 75p
5)-0
6) Al-0
7)v1.55
8) T-3
Does this mean I need a new cell or did I not add enough salt and Pich a Pennies reading of 3300 is off? I called aquarite but I have been working past 5pm and they close so I only had the readings above to give but I was not home.