We have just bought an AGP package including a gas heater. My main question is about the electrical code requirements. Reading the code for my area it seems that the 20A recepticle for the pump only must be the only one installed 5' - 10' from the pool. Then another general purpose recepticle is required at least 10' away but no more than 20'. This seems to suggest that if i want my pump and filter as close to the pool as possible, then i would have to have the heater another 5' farther away because it would have to be able to reach the general purpose recepticle. I dont like this idea of having to stagger the equiptment in different locations. It seems the only other alternative is to put everything exactly 10' away to satisfy both codes, which would leave alot of hose on the ground or have to hard pipe it which i dont want to do. are there other alternatives? Or am i missing a simple solution? any help would be appreaciated. thanks