My pool was installed and filled on Friday. I tested the pH and it was almost 0 so I used the pool calculator and it said to add (7) 182oz jugs of bleach. I added 4 not wanting to over do it. I let the pump run on high for about 2 hours after adding the bleach. This was Target brand 6% if that makes any difference.
Today I tested and I need help. Not sure where to start.
FC: 16
CC: 0
pH: 8.25 (used my Hanna digital pH tester), Taylor pH was almost 8
T/A: 150
CH: 120
CYA: clear so I'm assuming 0?
Temp: 72ºf
What do I adjust first?
I used the TF100 kit to test everything and I'm pretty sure the results are accurate.
Thanks!
Rob
15'x30'x54" AGP - about 13500 gallons.
Today I tested and I need help. Not sure where to start.
FC: 16
CC: 0
pH: 8.25 (used my Hanna digital pH tester), Taylor pH was almost 8
T/A: 150
CH: 120
CYA: clear so I'm assuming 0?
Temp: 72ºf
What do I adjust first?
I used the TF100 kit to test everything and I'm pretty sure the results are accurate.
Thanks!
Rob
15'x30'x54" AGP - about 13500 gallons.