No power to chlorinator

Jump to latest Follow Reply
N

nth

0
Jun 10, 2011
3
My IntelliChlorâ„¢ salt chlorinator is about 3 years old. I set my chlorinator too high, I wanted to lower the chlorine as quick as possible so I disconnected the chlorinator from its power supply. When I reconnected it, it lit up and was working. I came back in about 2 hours and it was off, the pump was running. I unplugged it and replugged it and it ran for a few seconds and quit and never worked again. No light was on. N The Intellchlor power box circuit breaker is good and the green light is always on. I am fairly sure that I turned off the power before plugging or unplugging.
Is it doomed or is it possible to repair?
 
Have you turned it off and unplugged it again and checked the contacts in the plug? That sounds like a likely place.
You shouldn't have had to unplug it, turning it off or setting it to zero % is all you should have had to do.
 
You must log in or register to reply here.
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Top Bottom
Back
Jump to latest Follow Reply