- Jun 12, 2011
- 3,763
- Pool Size
- 19500
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pureline Crystal Pure 60,000
I have been trying to get my TA down. I started around 240 and got it down to 100. But now that I have added borates its setting at around 120 or so and acid and aeration are bringing it down but oh so very very slooowly. I found some left over dry acid in my pool shed. Would it work as well or better than this weak 14.7 MA I've been using? Is the best method just drop pH to 7.0, then aerate to raise it back to 7.5, then repeat ad nausium? This is going to take a lot of acid and a lot of patience.
My CH runs very high here and from what I understand it is important to keep my TA at or below 100 to help prevent scaling.
My CH runs very high here and from what I understand it is important to keep my TA at or below 100 to help prevent scaling.