We didn't cover our pool last winter because we live in an extremely open, windy area. The winter before the wind ripped the cover off even after using deluxe clips as an added measure to keep the cover on. Was really a pain to deal with in the dead of winter. So I figured I skip that this time and just deal with cleaning up the pool when the time comes. BIG mistake! Now I have an even bigger headache to deal with.
Pool is greener than my grass. I fished out a couple frogs this morning, no telling what else might be in there. Here are my numbers.
FC 0
pH 8.2 or maybe a tad higher (test won't read any higher)
TA 100
Cal 70
CYA 0? (I'm guessing, waiting for my refills to arrive. Was 30 last summer, then drained below return to close without covering and just topped back off. It was 0 when I opened last summer, so I'm assuming it's the same this time.)
I know I need to lower my pH before I begin shocking. I've never had to do that before and can't remember how to add the MA. Pool Calc said I need to add 28 oz. to go from 8.2 to 7.4 but where do I pour it? In front of the return or slowly around the pool? I did a search and can't find the info. Also, how long after that do I need to wait to start shocking? I know I have to add CYA, just didn't know if I should wait until I get the pH fixed first or what.
Does it sound like I'm headed in the right direction? .......lower pH, add CYA, then shock. I know I need to brush, brush, brush then brush some more but I was going to wait until the water clears a bit since I can't see anything. I was planning to vac then too. I re-read "How to Turn a Green Swamp into a Sparkling Oasis" and hopefully I'm not forgetting anything.
Thanks for your help!
*Edited to change MA amount, don't know what I was looking at when I put 17 oz.
**Edited multiple times for title
Pool is greener than my grass. I fished out a couple frogs this morning, no telling what else might be in there. Here are my numbers.
FC 0
pH 8.2 or maybe a tad higher (test won't read any higher)
TA 100
Cal 70
CYA 0? (I'm guessing, waiting for my refills to arrive. Was 30 last summer, then drained below return to close without covering and just topped back off. It was 0 when I opened last summer, so I'm assuming it's the same this time.)
I know I need to lower my pH before I begin shocking. I've never had to do that before and can't remember how to add the MA. Pool Calc said I need to add 28 oz. to go from 8.2 to 7.4 but where do I pour it? In front of the return or slowly around the pool? I did a search and can't find the info. Also, how long after that do I need to wait to start shocking? I know I have to add CYA, just didn't know if I should wait until I get the pH fixed first or what.
Does it sound like I'm headed in the right direction? .......lower pH, add CYA, then shock. I know I need to brush, brush, brush then brush some more but I was going to wait until the water clears a bit since I can't see anything. I was planning to vac then too. I re-read "How to Turn a Green Swamp into a Sparkling Oasis" and hopefully I'm not forgetting anything.
Thanks for your help!
*Edited to change MA amount, don't know what I was looking at when I put 17 oz.
**Edited multiple times for title