I have been reading through some rather involved threads and trying to sort out a good estimate for GPM at various speeds. I used the spreadsheet that Mark posted in the 101 thread an got some confusing results below RPMs lower that 1700. I was hoping that someone can help me sort out a ballpark. Here is what I have:
Intelliflo VS+SRVS
2.5 suction with 2 independent skimmer runs and one main run
2.0 return split at pool into four return ports
Quad DE 80
MT400K BTU Heater
A couple of sample readings:
RPM 1500 - Watts 205 - PSI 2.5
RPM 2350 - Watts 818 - PSI 10
The spreadsheet says I have ~ 7 GPM @ 1500 and ~52 GPM @ 2400
Thanks in advance for any help!
Intelliflo VS+SRVS
2.5 suction with 2 independent skimmer runs and one main run
2.0 return split at pool into four return ports
Quad DE 80
MT400K BTU Heater
A couple of sample readings:
RPM 1500 - Watts 205 - PSI 2.5
RPM 2350 - Watts 818 - PSI 10
The spreadsheet says I have ~ 7 GPM @ 1500 and ~52 GPM @ 2400
Thanks in advance for any help!