I need some help with finalizing the install of my Easytouch4 system. Boy is it just me or does the manual suck?
All is installed low voltage relay for intellibrite lights, intellipro pump via serial cable, temp sensors, actuators -- JUST need to know;
What size circuit breaker I should use to connect from the Power source to the Control Panel Transformer (Purple, yellow wires).?
I assume you need a dedicated breaker to connect the power to the TRANSFORMER. I am running a 220V pump and 20Amp GFCI breaker for this and a 15 Amp breaker for three Intellibrite 120v lights. The main circuit is 100Amp from the house.
So do I use a standard GE 20AMP 220V duel pole breaker to connect to the transformer?? The panel is located indoors.
Also any other ideas on getting this installed properly would be appreciated. My pool is up and running and just trying to get the basic automation working.
Only want to use system for 1- Pump 2-Spa 3- Lights and 4-deck Jets.
Thanks
Blake
All is installed low voltage relay for intellibrite lights, intellipro pump via serial cable, temp sensors, actuators -- JUST need to know;
What size circuit breaker I should use to connect from the Power source to the Control Panel Transformer (Purple, yellow wires).?
I assume you need a dedicated breaker to connect the power to the TRANSFORMER. I am running a 220V pump and 20Amp GFCI breaker for this and a 15 Amp breaker for three Intellibrite 120v lights. The main circuit is 100Amp from the house.
So do I use a standard GE 20AMP 220V duel pole breaker to connect to the transformer?? The panel is located indoors.
Also any other ideas on getting this installed properly would be appreciated. My pool is up and running and just trying to get the basic automation working.
Only want to use system for 1- Pump 2-Spa 3- Lights and 4-deck Jets.
Thanks
Blake