Ok new to the pool world. Just had a small 12 foot above ground pool put in with a SWG. I have no idea what to do now. I've added the salt and have a Zodiac salt system, with clearwater technology pg 7 in the manual says add salt to raise level to 4000ppm, which it is at.
step 2 says install the cell, what's the cell?
I also took my water in to be tested, no chlorine yet as i've not turned on the machine
fc =0
tc=0
cc=0
pH=8.2
cyanuric acid=0
salt 4400
alkalinity = 70ppm
need to get cya up, how do i do this?
what should i do next?
pool place recommended 1st adding 4 cups of alkalinity control - but your site says it's ok
2nd hardness is low at 80ppm - how do I do this
3rd - turn on salt system
4th reduce ph with 1.5 cups of muriatic cups
what do you think?
thanks
rab
step 2 says install the cell, what's the cell?
I also took my water in to be tested, no chlorine yet as i've not turned on the machine
fc =0
tc=0
cc=0
pH=8.2
cyanuric acid=0
salt 4400
alkalinity = 70ppm
need to get cya up, how do i do this?
what should i do next?
pool place recommended 1st adding 4 cups of alkalinity control - but your site says it's ok
2nd hardness is low at 80ppm - how do I do this
3rd - turn on salt system
4th reduce ph with 1.5 cups of muriatic cups
what do you think?
thanks
rab