- Apr 18, 2010
- 49
Hello all,
New salt water pool owner.
Things have been going well, but a few q's as i get more into this:
1) Our Poolpilot Digital is set to 25% now, yet our FC levels are in the 8.0 - 8.5 range. Seems high given the fact that it is on 25%. I did notice the power level is set to 2 and not 1. Should I adjust?
2) Our CYA seems to be at about 60. Assume I should probably bring this up a bit (to 80) but with the high FC i wasnt sure.
3) My target pH is 7.6, Seems like I need to add about 20-30oz of acid/day to keep it there. I've typically just used the cheapie pentair kit. Today I tried the taylor kit in out TF-100 and it gave me a reading ~0.3 lower. Seems odd...any rationale?
thanks!!
Eric
New salt water pool owner.
Things have been going well, but a few q's as i get more into this:
1) Our Poolpilot Digital is set to 25% now, yet our FC levels are in the 8.0 - 8.5 range. Seems high given the fact that it is on 25%. I did notice the power level is set to 2 and not 1. Should I adjust?
2) Our CYA seems to be at about 60. Assume I should probably bring this up a bit (to 80) but with the high FC i wasnt sure.
3) My target pH is 7.6, Seems like I need to add about 20-30oz of acid/day to keep it there. I've typically just used the cheapie pentair kit. Today I tried the taylor kit in out TF-100 and it gave me a reading ~0.3 lower. Seems odd...any rationale?
thanks!!
Eric