I have been adding the pool calculator's MA measurement to my pool; however, I never get the PH down to the desired level based on the amount it tells me to add. It seems I have to add double the MA to get the desired affect. I did check the bottles for the correct strenght and plugged it into the pool calc. With a large overflow waterfall from the spa into the pool and 2 scuppers, could this be the cause of my struggle? I tend to lose TA quickly as well. I run my pump from 9am - 9pm and brush exactly once a week. I am in Dallas, TX.
I had this question on a calcuim topic and thought I should move it to it's own post. Any help is appreciataed. Here are my current levels.
FC - 5
CC - 0
CYA - 40
PH - 7.6
TA - 70
Caclium - 410
I had this question on a calcuim topic and thought I should move it to it's own post. Any help is appreciataed. Here are my current levels.
FC - 5
CC - 0
CYA - 40
PH - 7.6
TA - 70
Caclium - 410