This is the second motor that appears to have gone bad in a little over a year. Tub about 3 years old now. It is rated at 16.4/4.8 and is running 21.4
Runs for abit and shuts down. Starts back up after a few minutes, runs a few and back down.
Looking at the electrical supply and the cable is about 9 or 10 gauge.
Think that maybe that is why its frying the motors? Also. The j & j plug is wired that the red is to the slow speed and black to the high. Is that correct?
Runs for abit and shuts down. Starts back up after a few minutes, runs a few and back down.
Looking at the electrical supply and the cable is about 9 or 10 gauge.
Think that maybe that is why its frying the motors? Also. The j & j plug is wired that the red is to the slow speed and black to the high. Is that correct?