Hayward Navigator

[Mcb]

I've had an issue with mine going in circles. I followed a few posts and took it all apart and put it back together. Runs like a champ. I just moved here and dont haha manuals. I adjusted it on the different settings. It wont climb the walls much without being on 3. But 3 is pretty strong. It climbs out, or wants to and sucks air. Is that bad for the cleaner or pump?

 

[Mayorb]

Sucking air won't hurt anything, but your pump will run for a while before it catches full prime again. During these times you are at 0% efficiency. You should have a regulator at the end of the suction hose, where it is connected to the wall or the skimmer. This regulator (V094P) can be adjusted so the cleaner won't climb above the water line. About $20.