I am trying to re-install an Intermatic PX300 in our Association's pool. It is approximately 25 years old and is missing the "protector" a push button resettable circuit breaker. Intermatic will not give an info. Does anyone know what size / model circuit breaker this is?
Intermatic PX300 Transformer
- Thread starter Phil Johnson
- Start date
Phil,
Welcome to TFP.. A great resource for all your pool equipment questions..
When I look at the specs for the PX300 they say it takes 120 volts at 3 amps..
Not at all sure if you can even buy a 3 amp circuit breaker that will mount in the original position.
Because the thing is 25 years old, it might be wise to just buy a new one.. As they are only $100 bucks..
If this were for my personal use I would not care, but if this is for a community pool, $100 bucks is insurance money..
Thanks for posting,
Jim R.
Welcome to TFP.. A great resource for all your pool equipment questions..
When I look at the specs for the PX300 they say it takes 120 volts at 3 amps..
Not at all sure if you can even buy a 3 amp circuit breaker that will mount in the original position.
Because the thing is 25 years old, it might be wise to just buy a new one.. As they are only $100 bucks..
If this were for my personal use I would not care, but if this is for a community pool, $100 bucks is insurance money..
Thanks for posting,
Jim R.