Hello! My question is for an inground 25000 gal saltwater pool. The water is clear and it's 70 degrees. Readings from my ColorQ pro 11 are:
FC - 0.04
TC - 0.08
PH - 7.9
TA - 85
CH - 307
CYA - 22
Salt - 1600 (taken from a SaltDip digital tester)
It's been raining a lot lately and the pool took on about 6-8 inches of water. I drained it back down to the proper level, but I believe this is why the salt level is so low. If I add salt to bring it back up to the proper levels, does the salt chlorine generator automatically adjust the FC? Or will I need to add some to help it? Or, is my problem something totally different?
Thanks for the help!
FC - 0.04
TC - 0.08
PH - 7.9
TA - 85
CH - 307
CYA - 22
Salt - 1600 (taken from a SaltDip digital tester)
It's been raining a lot lately and the pool took on about 6-8 inches of water. I drained it back down to the proper level, but I believe this is why the salt level is so low. If I add salt to bring it back up to the proper levels, does the salt chlorine generator automatically adjust the FC? Or will I need to add some to help it? Or, is my problem something totally different?
Thanks for the help!