Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 2 of 2

Thread: Not enough suction & leaks

  1. Back To Top    #1

    Join Date
    Jun 2016
    Location
    Oak Hill Va
    Posts
    1

    Question Not enough suction & leaks

    I have just opened our pool this year. The fittings to our pump are glued PVC not screwed and seem to have 2 small leaks. So I am assume that's why I am not getting the suction I normally get. My pump motor seems to run fine and water is flowing through just not the way it usually does. The skimmer baskets are all fine but the water isn't pulling very well. Because the fittings were glued we would have to cut them to replace them. Is there something else we can try first to seal them?
    40,000 gallon in-ground pool
    Jen

  2. Back To Top    #2
    Mod Squad Jimrahbe's Avatar
    Join Date
    Jul 2014
    Location
    Bedford, TX
    Posts
    9,248

    Re: Not enough suction & leaks

    Jen,

    Welcome to TFP... A Great resource for all pool owners with leaky plumbing...

    Since you did not tell us anything about your pool or pump it will be a little difficult to provide much advice.

    How about telling us more, in-ground or above ground pool? What kind of pump? Etc...

    or

    You can just post a couple of pics of your pool and equipment pad.

    Thanks,

    Jim R.
    Finished in 2015 - 17K Gal, IG, 20' x 25' Almost Rectangular Pool, Pebble finish, three rockport water falls. Pentair Equipment: EasyTouch 4, IC40 SWG, 3 HP VS Pump, CCP520 Cartridge Filter.
    TF100 with SpeedStir and SampleSizer, ColorQ Pro 7, Dolphin Premier Robot Cleaner, added Screen Logic 2, added small 3 person Caldera Spa.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •