I am going to double check again today - but when I opened my pool yesterday it seemed like the ET control panel - under Pool Pump Settings (where you can set the pump speed) was not resetting the pump speed. Its a Sta-Rite (SRVS) pump, same as Pentair (SRVS).
Manually with the ET low voltage wire not connected to the pump (manually) the pump works fine. ie Pump speed 1,2,3,4.
All else works well from the ET- turn pump on/off.. but when I say reduce the speed from 2700 to 1700 the pump does not change speeds. It always worked before... as soon as you saved the setting.
Any ideas of what to check... thanks
Manually with the ET low voltage wire not connected to the pump (manually) the pump works fine. ie Pump speed 1,2,3,4.
All else works well from the ET- turn pump on/off.. but when I say reduce the speed from 2700 to 1700 the pump does not change speeds. It always worked before... as soon as you saved the setting.
Any ideas of what to check... thanks