I have a 24 round above ground pool and my issue is Alkalinity vs PH. I started out with the Alkalinity at 200 and PH at 7.4 all other chemicals were perfect. I put in muratic acid and brought the alkalinity down to 100 after a few days and ph was really low as expected. I added PH up till it got back to 7.2 but alkalinity went back to 160. Sooooo I added more muratic acid and got the alkalinity BACK down to 120 but the PH was low again and I added PH up till it got back to 7.4 but once again the alkalinity is back to 160. Water is EXTREMELY CLEAR and all my other chemicals are right on the money. Any idea how to raise the PH without raising the alkalinity ??? Thanks guys