Hey Again -
We seem to be having our fair share of start-up problems so far.
The latest is that we cannot get our Intellibrite lights to sync. Here's the setup:
One Intellibrite Pool light
One Intellibrite Spa light
Both wired together through a single 12v transformer.
Connected to Easy Touch panel through a single AUX relay. Circuit is labeled as Intellibrite for Aux2, is labeled as 'Lights' and is set up in the Lights/Config menu as 'Lights' under #1.
Lights come on and off no problem but are different colors. The Sync feature on the Easy Touch toggles the relay a few times but the end result is usually a red spa light and a blue pool light. The pool light seems to be following the commands from the Easy Touch panel. If I choose Green, the pool light turns green but the spa light goes into party mode with multiple colors flashing.
Any ideas on how to get these things in sync? I wanted them to be switched separately but our PB pretty much ignored it and wired them together. I'll redo them some day but for now, I would just like them to be the same color.
Thanks in advance.
We seem to be having our fair share of start-up problems so far.
The latest is that we cannot get our Intellibrite lights to sync. Here's the setup:
One Intellibrite Pool light
One Intellibrite Spa light
Both wired together through a single 12v transformer.
Connected to Easy Touch panel through a single AUX relay. Circuit is labeled as Intellibrite for Aux2, is labeled as 'Lights' and is set up in the Lights/Config menu as 'Lights' under #1.
Lights come on and off no problem but are different colors. The Sync feature on the Easy Touch toggles the relay a few times but the end result is usually a red spa light and a blue pool light. The pool light seems to be following the commands from the Easy Touch panel. If I choose Green, the pool light turns green but the spa light goes into party mode with multiple colors flashing.
Any ideas on how to get these things in sync? I wanted them to be switched separately but our PB pretty much ignored it and wired them together. I'll redo them some day but for now, I would just like them to be the same color.
Thanks in advance.