Hello all. I'm about to commence building my own pool here in Texas and need a little guidance. Seems like there's several ways to attack the fittings on the pool and just wanted to get some other people's thoughts.
I'm trying to figure out what fittings eventually go on the end of the plumbing for returns / pool cleaner. I think a slip on (aka glue it with pvc glue) 1.5" threaded fitting is the way to go? Seems like the most common that I see when looking up the eyeball jets and such.
E.g. gray wall fitting 1.5" gunite - Google Search
I'm also guessing that the nicheless LED lights fit into the same socket right? such as these: Jandy Nicheless LED Underwater Light, RGBW Watercolors | 12V 20W 50 Cord | JLU4C20W50
Lastly if I'm headed down the right path here I'm assuming these get installed just before the plaster / pebble tec phase. I also am guessing they'll build the material up to where it's pretty flush with the back side of these wall fittings yes?
Thanks for any comments and feedback!
I'm trying to figure out what fittings eventually go on the end of the plumbing for returns / pool cleaner. I think a slip on (aka glue it with pvc glue) 1.5" threaded fitting is the way to go? Seems like the most common that I see when looking up the eyeball jets and such.
E.g. gray wall fitting 1.5" gunite - Google Search
I'm also guessing that the nicheless LED lights fit into the same socket right? such as these: Jandy Nicheless LED Underwater Light, RGBW Watercolors | 12V 20W 50 Cord | JLU4C20W50
Lastly if I'm headed down the right path here I'm assuming these get installed just before the plaster / pebble tec phase. I also am guessing they'll build the material up to where it's pretty flush with the back side of these wall fittings yes?
Thanks for any comments and feedback!