i have a pool which has faced many problems in it's lifetime, and i've finally decided to remedy them.
the pool in question is a 16x32 ft concrete pool which is currently epoxy painted.
i would like to install dual main drains, new returns and a new skimmer, all with 2" pvc.
i believe i have all the info i need to start to undertake this task however i wanted to be sure.
Steps:
i'll be redoing the entire pad as well as i want it to be in an enclosed pump room.
is there anything i'm missing here?
i apologize in advance for the long post.
steps 1-6 are really the ones i want to be sure about. all the equipment i'm planning to order is in my signature.
the pool in question is a 16x32 ft concrete pool which is currently epoxy painted.
i would like to install dual main drains, new returns and a new skimmer, all with 2" pvc.
i believe i have all the info i need to start to undertake this task however i wanted to be sure.
Steps:
- sandblast the entire pool (as it needs repainting anyways)
- core drill two old returns and install new, run new line to pad
- core drill two new holes for colorlogic nicheless lights
- cut out a chunk of the pool bottom to install the main drains, run new line to pad
- cut out old skimmer and replace, run new line to pad
- fill all holes with hydraulic concrete
- tsp clean pool
- acid wash pool
- tsp clean pool
- repaint with epoxy paint.
i'll be redoing the entire pad as well as i want it to be in an enclosed pump room.
is there anything i'm missing here?
i apologize in advance for the long post.
steps 1-6 are really the ones i want to be sure about. all the equipment i'm planning to order is in my signature.