So, the pool has been running for a few days now. The PB put in 2 1/2 gallons of Muriatic acid, 2 bottles of scale control solution and 1 container of stabilizer when he opened it. The pump has been running for 24 hours and I've been brushing twice a day.
Got a water test done at Leslie's on Saturday and got the following numbers: FC 0, TC 0, CH 200, CYA 0, TA 90, pH 7
Then i did a test myself yesterday, using the Taylor K-2005 kit the PB provided and got the following: FC 2, TC 2, CH 220, CYA 50, TA 140, pH 7.8
I added chlorine tabs in the chlorinator yesterday, and set it on high, so we'll see if that raises the chlorine. The TA seems higher than needed, is that a problem? If so, how do i lower that?
Will do another test today, to see what the variations are.
Thanks.
G