Another code 91 and I'm ready to throw it out

May 30, 2016
1
New Sharon Iowa
I know the code 91 (low salt) has been discussed many times and I am bringing it up again. I just replaced the electrode at the beginning of the year and it was working great. Now 2 months later I'm getting the same code. I have cleaned the electrode with vinegar. I have tried to get all of the air out. The system will run for about 15 minutes before erroring. I'm not sure what to try at this point.

FC is 3 and decreasing.
CC 0
Ph 7.6
TA 110
Ch 450
Cya 90
Temp 87
Salt 3050

Pool is 15000 gallons
 
If a low salt error exists and the cell is clean then adding salt seems like the right answer.

- - - Updated - - -

If a low salt error exists and the cell is clean then adding salt seems like the right answer.

Always add bleach as necessary to keep you FC at target for your CYA so that the pool remains sanitary and safe, [FC/CYA][/FC/CYA]
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.