I am having a terrible time with my pool and am new to this forum.
Did 2 partial water changes due to high CYA (over 100) and very cloudy water.
In the time to drain and refill, the pool started turning green.
Started SLAM with these numbers--
PH 7.5
FC 6.0
CC 0.25
TC 6.25
TA 80
CH 400
CYA 55
I want to make sure I am understanding the SLAM process--Am I to just keep adding bleach until my FC is at target?? (20 from the chart)
After 20+ bottles it is still only at 17 and the water is even greener. How many times a day should I be testing? Or should I just keep pouring in the bleach as long as it stays green? It is super hot - 90 degrees here! I could use some encouragement that I am on the right track!!
Any help is greatly appreciated!!
Did 2 partial water changes due to high CYA (over 100) and very cloudy water.
In the time to drain and refill, the pool started turning green.
Started SLAM with these numbers--
PH 7.5
FC 6.0
CC 0.25
TC 6.25
TA 80
CH 400
CYA 55
I want to make sure I am understanding the SLAM process--Am I to just keep adding bleach until my FC is at target?? (20 from the chart)
After 20+ bottles it is still only at 17 and the water is even greener. How many times a day should I be testing? Or should I just keep pouring in the bleach as long as it stays green? It is super hot - 90 degrees here! I could use some encouragement that I am on the right track!!
Any help is greatly appreciated!!