Installed this unit in 2004, I am a SWG pioneer. This year the readout is not logical - I received the following results:
Pool Temp - HOT
Cell V - 30.6
Cell Current - 0
Desired Output - 72P
Instant salinity - 0
Product name- AL-4
Sware Rev - 1.3
IT DOES NOT GIVE ME A SALT PPM READING
So I pulled out the boards, cleaned them and put them back.
New results:
Pool Temp - 3.5 (I also tried to convert C to F and viceversa with no luck)
Cell V - 30.6
Cell Current - 5.1
Desired Output - 72P
Instant salinity - 0
Product name- AL-0 (Yes, this changed???)
Sware Rev - 1.3
IT DOES NOT GIVE ME A SALT PPM READING
I maintain the unit every 3 months, clean it, etc. Recently checked cell and it is operational.
Do not understand how the readouts could have changed. The readouts were OK last week. I had to add chlorinie (for the first time) to my pool yesterday as chlorine level was 0.0.
Any thoughts?
Pool Temp - HOT
Cell V - 30.6
Cell Current - 0
Desired Output - 72P
Instant salinity - 0
Product name- AL-4
Sware Rev - 1.3
IT DOES NOT GIVE ME A SALT PPM READING
So I pulled out the boards, cleaned them and put them back.
New results:
Pool Temp - 3.5 (I also tried to convert C to F and viceversa with no luck)
Cell V - 30.6
Cell Current - 5.1
Desired Output - 72P
Instant salinity - 0
Product name- AL-0 (Yes, this changed???)
Sware Rev - 1.3
IT DOES NOT GIVE ME A SALT PPM READING
I maintain the unit every 3 months, clean it, etc. Recently checked cell and it is operational.
Do not understand how the readouts could have changed. The readouts were OK last week. I had to add chlorinie (for the first time) to my pool yesterday as chlorine level was 0.0.
Any thoughts?