@cowboycasey: How long is the cable that goes from the cell to the control unit? The other unit I was looking at said it was 15 ft.
I had posted pictures last night that probably cover your questions on my current setup here:
http://imgur.com/a/i3L3Q
This does not include the heat siphon Z575HC heat pump that is on order. That will change my setup and I'm hoping to have my electrician do both the heat pump and SWG install at the same time. I have a single post with a subpanel on it now with several outlets on that post for the pool. Your setup is nicer with the cover. I was thinking of asking for a 2nd post and then building/constructing something to be over the control module. My yard has little tree coverage so direct sun exposure (south facing back yard) would be an issue without putting something over it.
I also had a question on the installation of this SJ40 unit you are suggesting. In the manual posted here: http://www.circupool.com/downloads/sj_20150516.pdf
They say this: The cell must be oriented horizontally with ports facing down. The cell should be located above the highest plumbing point, and raised at least 6" from the return line.
I read this to say for my setup, I would need to have the cell plumbed/located 6" above my return hole in the side of the pool. Obviously the plumbing will change from my current flexible hoses to something new with the heat pump install, so I just wanted to make sure I understand what they are saying. Take a look at my current pics and validate my thought if you don't mind.
Thanks..
I had posted pictures last night that probably cover your questions on my current setup here:
http://imgur.com/a/i3L3Q
This does not include the heat siphon Z575HC heat pump that is on order. That will change my setup and I'm hoping to have my electrician do both the heat pump and SWG install at the same time. I have a single post with a subpanel on it now with several outlets on that post for the pool. Your setup is nicer with the cover. I was thinking of asking for a 2nd post and then building/constructing something to be over the control module. My yard has little tree coverage so direct sun exposure (south facing back yard) would be an issue without putting something over it.
I also had a question on the installation of this SJ40 unit you are suggesting. In the manual posted here: http://www.circupool.com/downloads/sj_20150516.pdf
They say this: The cell must be oriented horizontally with ports facing down. The cell should be located above the highest plumbing point, and raised at least 6" from the return line.
I read this to say for my setup, I would need to have the cell plumbed/located 6" above my return hole in the side of the pool. Obviously the plumbing will change from my current flexible hoses to something new with the heat pump install, so I just wanted to make sure I understand what they are saying. Take a look at my current pics and validate my thought if you don't mind.
Thanks..