Alright, we started the 'Turn your Green Swamp...' process yesterday, and it seems to be working well.
Here was where we started:
PH - 7.2
CYA - 50
FC - 0
TA - 60
and a pic:
And here is the pool after two days:
My questions:
1. My CC is getting close to 0.5, but the water is still very murky. I assume from the article that it may take quite a while for the water to clear?
2. As shown, we have a lot of 'foam' on the water's surface. Is this a normal byproduct of the process?
3. From the article, I anticipated having to use a TON of shock for this so I am way overstocked. Will it go bad, or can I reliably use it throughout the summer?
Thanks for any advice you can give,
Dr B
Here was where we started:
PH - 7.2
CYA - 50
FC - 0
TA - 60
and a pic:
And here is the pool after two days:
My questions:
1. My CC is getting close to 0.5, but the water is still very murky. I assume from the article that it may take quite a while for the water to clear?
2. As shown, we have a lot of 'foam' on the water's surface. Is this a normal byproduct of the process?
3. From the article, I anticipated having to use a TON of shock for this so I am way overstocked. Will it go bad, or can I reliably use it throughout the summer?
Thanks for any advice you can give,
Dr B