When I hit my Spa button my Pump doesn't turn off while the valves turn like it always done before. I verified in the System Setup Menu the the Pump Lockout is on. What else can I troubleshoot to fix this problem?
You can enable/disable the pump to run during the valve rotation, but the pump will run in a "cool down" if the heater has run in the 5 min prior to hitting the button to shut off.
IOW, if you have the pump run during valve rotation disabled, and the heater hasn't run (5 min prior), the pump should shut down when you hit the (spa) button to turn off.
Gentleman thanks for your replies.
The pump has always turned off during valve rotation (pump turns off the pump light blinks while off usually 30 seconds or so) then after rotation it turns back on.
I have the pump lockout on in the system setup and haven't had the heater on in days and it's still not turning off during valve rotation.
I have tried Clearing Memory, should I try the reset button on the side of the Control Panel?
Any other suggestion or ideas on what the problem is?
I guess the downfall to it not working again would be the strain on the valves during rotation to cause them to go out faster...
Update, I needed to shut the power to the pool equipment at the main breaker the other day. When I used the Spa last night the pump did delay during valve rotation.
Not a issue anymore!
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!