HELP!!! I recently bought a home that came with a very large above ground pool (wife says 36’ and pool place says 40’) but the picture will help I hope. The owner said that the filter and pump were new so I just assumed everything worked since we bought it in the winter. I went to turn it on the other day to hopefully get the pool ready to start swimming soon only to see it wasn’t working correctly. I noticed he had 2 lines crossed and I fixed them. Then I couldn’t get the pump to get the air out of it, so I filled the pool a little higher than ½ way on the skimmer (which after some heavy rain it’s above the skimmer almost now) and still haven’t been able to get the air out. That’s when I noticed that the pressure gauge never moves and that the waste port was leaking a good bit of water. After watching about 20 videos on YouTube I’ve learned that this usually means a bad spider gasket. I watched some videos on how to replace it and when I took mine apart I realized that my gasket is on the head and not the body. I also noticed the center piece on the body appears to have broken off. On top of all this, I don’t know what this guy did to winterize the pool because he said he did and then I found the wrong lines connected so who knows honestly. He also never covered the pool itself and doesn’t even have a cover. I’ll post the pictures I took so you can get an idea of what I am looking at and if anyone can help before I break down and just by a whole new setup I would be very appreciative. Well I'll try and post pictures but the ones I originally put were too big and now it won't let me add any more because the size is at it's limit.