Hello and sorry to post my own question in regards to run settings about my pool. I am new to this forum and there is a lot of information here, it has helped me a lot, i had my pool build about a year ago and it has and still taking time to learn about this system. It is a salt system, pentair equipment, it is about 11k gallons, shape is kind of like "C" with spa raised above pool about two to three feet, so we have a water fall from the spa onto the pool. BTW i live in southern California, i know where you live has a lot to in setting up the pool correctly. the deepest part is 5 feet and 3 feet in the beginning, i also have an island. All my chemicals are running ok, i take my water to get tested to leslies once in a while, other than that, i do my own testing and take care of the pool as well. i used to run the pump at 2300 for 8 hours, just about the beginning of this year i reduced it to 2300 for five hours, one thing to note is that if i don't run it at that speed, the water fall will not go on to the pool and my kreepy krauly will not move. i would like to save more money when it comes to electricity, so based on what i have described so far, do you guys think that if set one scheduled to run at 2300 from 8 to 10 am, this way the kreepy krauly will do its run for cleaning and another schedule to run after 10 to 6 running at 1700 so that the water moves around, will this setting work for me, i was trying to change the 1700 to 1000 but the setting does not let me. Any help is really appreciated thank you all.