Hello, I have been ready thru all the threads, helps, schools, etc... I recently purchased a home with a 16x32 inground vinyl pool. I opened it up a few days ago and was suprised that it was actually clear. The water on the deep end is a little cloudy but nothing major. I tool a water sample to my local pool store (I am waiting on my test kit to come it) and they gave me these results.
FC=0.08
TC=0.17
CC=0.09
PH=6.5
CH=19
CYA=40
Copper=2.2
Dissolved Solids=500
Saturation Index=-2.7
Endure=0
They want me to pour 5lbs of Versene to lower the Copper before I do anything else. Does this sound logical? Any advice is greatly appreciated. I also want to note that I am on well water and was told by the previous owner that the pool was filled from the well. I have read that well water can cause high copper levels. I do not know what was used to close the pool last fall but it was performed by a professional.
Thanks
FC=0.08
TC=0.17
CC=0.09
PH=6.5
CH=19
CYA=40
Copper=2.2
Dissolved Solids=500
Saturation Index=-2.7
Endure=0
They want me to pour 5lbs of Versene to lower the Copper before I do anything else. Does this sound logical? Any advice is greatly appreciated. I also want to note that I am on well water and was told by the previous owner that the pool was filled from the well. I have read that well water can cause high copper levels. I do not know what was used to close the pool last fall but it was performed by a professional.
Thanks