After using the pump to vacuum the pool, I switched it back to filter and now its not pumping. I first checked the intake which was clear. I then disconnected the lines to check to check for a clog, but nothing, strainer is clean too. So I figured it was the pump, luckily for me I have a friend with the same setup, so I borrowed his to test. Come to find out same thing.... Could I have clogged the sand filter to the point water will not go through???? After cleaning the pool, I was not able to back wash because the pump would not pump. I have not pulled the top on the filter, but thats the only thing I can think....
Any help would be greatly appreciated.
Any help would be greatly appreciated.