Although I won't be breaking ground until around March, I figured I'd start this thread and keep the forum updated on any progress. I'm currently waiting for the permits which lately have been taking a bit longer to get in the region. I have chosen a 16x35 Cancun fiberglass pool by Viking. I have included the design photo of the pool, as well as the location of where it will go. Here are the specs:
16x35
Depth: 3"6"-6"6"
14,000 gallons
1 Skimmer, 2 Returns, 1 Main drain
2 Deck Jets
3 Benches
Clean gravel fill
Sump pit
2" PVC Piping
Hayward 1.5 hp Super pump
Hayward Swimclear 3030 (325 Sq. ft Cartridge). I may upgrade to 425 Sq ft.
Hayward Aquarite SWCG (T-15 40,000 cell).
Hayward H Series 250,000 BTU Gas Heater
3 Hayward LED Lights
Dolphin Active 10 (I'd like to upgrade to the Active 20 or 30i) the Dolphin was thrown in free along with the heater.
All other cleaning equipment (Brush, poles, vacuum, etc.)
2 Trucks of water (I have a well)
Those should be enough specs to get the ball rolling. I'm open to questions, comments and suggestions. Here are the photos.
16x35
Depth: 3"6"-6"6"
14,000 gallons
1 Skimmer, 2 Returns, 1 Main drain
2 Deck Jets
3 Benches
Clean gravel fill
Sump pit
2" PVC Piping
Hayward 1.5 hp Super pump
Hayward Swimclear 3030 (325 Sq. ft Cartridge). I may upgrade to 425 Sq ft.
Hayward Aquarite SWCG (T-15 40,000 cell).
Hayward H Series 250,000 BTU Gas Heater
3 Hayward LED Lights
Dolphin Active 10 (I'd like to upgrade to the Active 20 or 30i) the Dolphin was thrown in free along with the heater.
All other cleaning equipment (Brush, poles, vacuum, etc.)
2 Trucks of water (I have a well)
Those should be enough specs to get the ball rolling. I'm open to questions, comments and suggestions. Here are the photos.