Hello Everyone!
I have a newley built plaster pool about 15,000 gallons that I been running off of test strips for the past 3 weeks. The water looks great currently.
With research from TFP I ordered the TF-100 Test Kit and here are my results.
CDT = 1.5ppm
CC = 0
TC = 1.5
PH = 7.5
Total Akalinity Test = 80
CYA = 20
CHT = 325
I do have a Pentair C320 auto chlorine feeder filled with 3" tabs. I have it up to 4 and it seems like my chlorine readings are usually low. I'm not sure if something's wrong with it but I been throwing a 3" tab in my skimmer about every week and a half.
The water is very clear and I would like to keep it that way. Please advise what I should be doing to help these numbers. Not really sure what I should be doing with the info.
Thanks!
I have a newley built plaster pool about 15,000 gallons that I been running off of test strips for the past 3 weeks. The water looks great currently.
With research from TFP I ordered the TF-100 Test Kit and here are my results.
CDT = 1.5ppm
CC = 0
TC = 1.5
PH = 7.5
Total Akalinity Test = 80
CYA = 20
CHT = 325
I do have a Pentair C320 auto chlorine feeder filled with 3" tabs. I have it up to 4 and it seems like my chlorine readings are usually low. I'm not sure if something's wrong with it but I been throwing a 3" tab in my skimmer about every week and a half.
The water is very clear and I would like to keep it that way. Please advise what I should be doing to help these numbers. Not really sure what I should be doing with the info.
Thanks!