Hello, so I have this Emerson ESQ1102 Square Flange Pool and Spa Motor 1 HP. its quite a few years old. I replaced the bearings on it about 4 years ago. It has been working fine since. nice and quiet.
This morning, the water in the pool was barely moving, but the pump/motor was on and sounded fine. The pump had prime, just no pressure.
I shut off the pump at the panel and the motor wound down very slowly. It normally shuts off instantly as I'm sure you know.
Any ideas as to what the problem is? Thanks for any help!!!
This morning, the water in the pool was barely moving, but the pump/motor was on and sounded fine. The pump had prime, just no pressure.
I shut off the pump at the panel and the motor wound down very slowly. It normally shuts off instantly as I'm sure you know.
Any ideas as to what the problem is? Thanks for any help!!!