Hmmm. So, did you go look at the Aqualink board to se if the pump indicator lite is on? I'm thinking that the motor is not coming on in spa mode, which would cause nothing to work Also, will your spa light and jet pump come on? We need to narrow it down.
No pump indicator lite came on. I pushed the spa light and it came on. Same with the pool pump and the small pump came on when I pushed the Rav-Vac button.
And the blower came on after pushing its button. All while in service mode.
Well, since I can not get the SPA to work I was wondering if I could close the SPA down by going as "service" and empty the spa then put in the drain and
return plugs? That would allow me to just run the pool and not use the extra water that it take to fill the SPA.
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!