support

Hi TFP, this is my first post here. I was looking for help on finding the manual for this hayward HP50AEE heat pump, as it did not come with it when purchased and I can't find any information about this specific control panel online. I called hayward and they gave me the part number HPX72200070...

hello, thank you in advanced as i mentioned I'm a new pool owner and looking for some help with my package choice this is the configuration that i consider : https://www.thepoolfactory.com/pages/customizer?pid=saltwater-5000-18x33x52-oval-pool&uuid=NjYwNjQ0ZTAxN2UwOQ%3D%3D 18'x33'x52"...

Hello everyone! I have a 24' round above ground pool that was installed before I moved in (it sounds like possibly 20 years ago). It was built in a hill with retaining walls on the high and low sides. When we moved in we saw the wall on the low side was leaning out. Over the past 3 years it...

Hi everyone, I am installing a Bestway Hydro Force Steel Max Round 12 foot pool. Got to level the ground perfectly and managed to put a paver in position for each leg. Everything sounds easy, but it's been 5 or 6 not full days of work. Leveling is not hard, but it is definitely time-consuming...

I know, I know it’s really bad. I was helping someone open up their pool this summer and setting up a new DA filter and pump. I thought it was fine to not have DE filter but I was very wrong from what I’ve seen from other posts. We were reusing the old water from last year and it was dirty. I...

I am installing a 13' x 42" Bestway above-ground pool. I have leveled pavers (for the legs) and ground. I will be using 2" Owens Corning XPS Foamular 250 2 inches from Home Depot under the pool ($30/board). I am planning to use the same foam boards when I upgrade to a larger pool size in a...

Hi All, We are currently filling a 24' x 52" round pool (actual water depth will be around 44 "). We have a pretty decent slope in our back yard so I spent 3 days over Memorial Day weekend tilling and shoveling dirt to try and level the ground. I used a 12' long 2x4 with a 3' level to check and...