pentair superflo vs

We were having a leak, so we replaced the seal shaft. I have a brand new motor 353134s, new seal plate, and replaced the shaft seals with 354545s (from Amazon) seal. We used lubricant to set the seals in, made sure white ceramic part was touching black rubber part of the seal. The screw for the...

While closing my pool last season, my relatively new Superflo VS (2 seasons = 10 months of use) started losing voltage/tripping it's breaker. It happened relatively quickly after running dry for a few minutes. I had never had any electrical problems with my setup before. The problem seemed to go...

I have the utmost respect for the time people take to answer questions. I have spent a few hours reading these forums and learned a lot. However, I can’t understand what my best options would be as no post has both my pump and heat pump. Hi. Here is my setup: Pentair SuperFlo VS Variable Speed...

Well, I've done it again. This is my first year opening our pool and I just discovered that I should not be running my pool pump at 3400 rpm 24/7 (since March). Thank you, TFP, for saving my poor pool. Will you help me make sure that I have the settings right for now? I will keep an eye on...

I have a Pentair SuperFlo VS pump out of warranty with an issue whereby the clock does not retain current time even with a short power interruption. Apparently the fix is ~$400 control board. As an alternative, I am considering using the Pentair Digital Input cable in conjuntion with a battery...