light niche

Hello all, I’ve got an older pool (1990s) with a vinyl liner from 2019. The light niche ring has corrosion on it, and the light itself has been malfunctioning. There is not enough slack in the cord to access the light niche without draining the water, so the pool guys drained the water down...

I have a fiberglass pool with a Pentair Intellabrite 5G spa light. After a year or so of owning the pool I started to see some rust colored junk on the face plate of the light. I removed the light from niche to clean and unleashed a giant plume of algae. After lots of scrubbing on the pool...

Howdy all, had some serious staining on my walls last year, they would wipe off with the ol vitamin c trick, and when I pulled my light for the winter, a bunch of bright orange rust came out with it. Called the pool company, they haven’t been out yet. I managed to drain the pool enough to get a...

After a lot of pressure testing, dye testing, etc., I found that I've got water flowing into the electrical conduit in the back of one of my light niche's (wet niche, Pentair Intellibright LED light fixture). There is a bonding (ground) wire and the light cable running into the conduit from the...

Hi all, I have Hayward ColorLogic 12v lights in my pool (model number LPCUS11100) but would like to replace them with Pentair IntelliBrite lights, as I have Pentair EasyTouch and when I switched to Pentair the installer misadvised me when I asked him if I would lose any functionality as far as...

My pool, built in 2006, has 4 Jandy color-changing 120V halogen lights: two big ones and two little ones (one in the spa). We didn't notice this until a few years ago, but the two large lights are in niches that were installed cockeyed when the pool was built, so the screw receivers are at...

Electrical questions: I recently had a leaking pool light niche replaced. The shell around the light was replaced with a metal housing and a new yellow jacket 3 wire electrical with a separate bonding cable pulled into the junction box. The old wiring had no bond up at the junction, but was and...