jet

Hello, we are having our rectangular pool renovated, which includes the addition of an infinity edge that is partially along a short and a long edge - meeting at the same corner (creating a right angled V shape). The pool is approximately 4.5m by 9.5m. On the opposite side of the 4.5m edge to...

Hello, Recently purchased a home with an old pool (+/-30 yrs) So far it has been wonderful. My eyeballs jet returns need replacing, but the ones i have do not look like others. I've tried grabbing, twisting, pulling on the 'housing' but it does not move. I have not tried any tools yet, I didn't...

I need to replace my 20 year old spa jets. One has come apart, and the others don’t spin. I assumed you take them out by unscrewing the knurled ring, but the are stuck and I’m afraid I will break something if I keep at it. Any help appreciated. Thanks!

Recently my crew and I completed the initial pool start up for 2 fiberglass pool/spas both of the spas are slamming water up the air pipe to the extent of being inoperable. We spoke to our salesman and he told us that the fittings they pre installed in our spas do not have the Venturi effect and...

I have an underwater jet pointed upward, placed in a kind of "sunbathing shelf" on the edge of the pool. Recently, the water coming from the jet has begun causing significant waves throughout the pool. The nozzle doesn't seem to be broken or malfunctioning. How do I stop the waves?

Laminar jet has slipped 4" down the concrete sleeve. I bought a reverse pliers to extract, but it still isn't budging. Has anyone had this issue? What are my options?

Hello, I am trying to figure out how to replace a broken jet In our in-ground gunite spa. I found the part I think I need to replace here CMP 23315-030-000 1.5 in. MPT Gunite Spa Jet44 I have never replaced a spa jet so not sure if this is all I need to replace or how to go about replacing it...

I think I have what should be a fairly easy question for the TFP forum. My spa has 5 returns. Appears the eyeball jets or whatever go there crumbled/deteriorated away over time with the previous owners. Question is; what are the appropriate / intended fittings to go here? I’ve found a couple...

We have a 2019 HydroPool swim Spa that we’ve owned for about two months. It is installed indoors. There are three pumps, one of the two main swim jets is not working. The other two work fine. It does not make a sound. We’ve done all the troubleshooting such as topping off the water, checking for...