actuator

I have AQUA Logic Display and a Hayward Goldline Aqua Logic Main Circuit Board GLX-PCB-MAIN It controls two actuators which turn on the fountain jets and are connected to Aux 1 and Aux 2 of the display. (Aux 1 and Aux 2 also control the relays, but nothing is connected to those relays). The...

I currently have a DIY solar system that works sweet all except for it being manually controlled & far too often I forget to turn it off & on (last night lost all heat gain from 2 days prior - ugh). So I'm wanting to add an actuator to my Jandy 3-way valve and a solar controller. I'm thinking...

I have the Pentair Easy Touch panel and the valve actuator for the water fall stopped working. I just installed a new actuator, but it too is not responding. Plugged into AUX port A, "vlvA", and when I move the switch on the unit from Off to ON1 or ON2, the actuator rotates. But nothing...

I am using the four ports already and I need one more for my last remodel. Is there a device I can use to add an extra port somehow? Thanks

This is my first freeze season with a pool. I have 2 pentair VS pumps and intellitouch control panel. I have setup the programming such that "on with freeze" is enabled for the following modes/features: spa, pool, floor cleaner (PV3, set as "generic device"), deck jets, bubbler, spillway, and...

[UPDATE] The Pentair single-body EasyTouch system will operate a spa w 2 valves, see below. Hi, I have a pool with attached spa, incl. an actuator valve for both inlet and outlet lines. I just replaced my flaky unit with one for single-body systems. the valves don't move when I hit spa mode on...

When I flip my pool to spa mode, the return valve actuator tries to turn but gets hung up in a number of places and starts clicking loudly...I can force it (gently) the rest of the way around with a little manual pressure, and once in spa mode the same things happens going the other way when I...

Album Link with Diagram and short demo video: https://photos.google.com/share/AF1QipPePNtaRleoPiGWqiSO6MFvwp_aetOlRAMRII-YXtbrvU1AdmA879ONrODEBQw-2A?key=c2YxRDhjTkx4RUpvbEFpUzRtQ1lDSThsZHhTREV3 Using a SONOFF 4CHPROR3, I have integrated the control of my Filter Pump, Booster Pump, and two Jandy...

Hi, I need some help on how to determine if the actuator is bad. When the pool is on and off, the valve is not responding, hence not turning at all. Initially, I thought the switches are bad but when I tested by switching the manual on the back up and down, I can see the switches turn and stop...

Hello, So I heat my spa and then later when the filter runs in pool mode, it sends some of the pool's cold water into the spa (basically un-heating the spa). I know this is to make it have a nice overflow into the pool...its only like a 2" drop so it is not like it is a necessary sound. Is...

Pentair Actuator