Search results

Went home on my lunch to check on the pool. To my surprise the water was still trickling down the slide but the pool looked like the photo below. I gave the pool a quick brush to try to agitate things and a few minutes later the noise of the pump changed and the trickle of water stopped. I...

This morning the FC had dropped to 16. I put some more liquid shock in to bring it up to a minimum of 20. I didn't have time to test the CC. The part that I am most worried about is the filter pressure. Before I tested the water I cleaned my filter grids as the PSI was high. I then started the...

just over 2.5 hours since adding the liquid shock and Im still holding at 23 for FC. Ive checked twice since I added it with no change. Im a little higher than the 18ppm I was aiming for. Is it normal for the number to stay the same after a couple of hours? Ive had to clean the filter once due...

Thanks Pooldv. Ive updated my signature so hopefully it will show below. I added about 3.5 gallons of liquid shock as per PoolMath. I'll give it an hour to circulate and then I'll do a test on the FC

performed the test. Below are the results. PH = 7.5 FC = 0 CC = 0.5 TC = 0.5 TA = 80 CYA = 45 CH = 200 What is my next step?

Thanks. Yestderay I purchases 7 bottles of Liquid Shock (12.5%) for $2.79/ gallon. I also got a gallon of muriatic acid (31.45%) and 4lbs of Clorox Pool Stabilizer. My TF-100 kit was delivered yesterday and the plan is to test today and then adjust as you guys recommend after I post the test...

my TF-100 kit is getting delivered today and I would like to pick up which chemicals I may need in order to start the SLAM process. I know that you guys will tell me that you need the test results to advise which chemicals to add to the pool but due to my busy schedule I would prefer to get the...

There hasn't been too much stuff in the baskets at the skimmer or the pump since we took the cover off. I have tried blowing out the lines with the shop vac but ill pick up a bladder tomorrow and give that a shot. Any other suggestions?

thanks pooldv. Ill try to get some test done. I order the test kit today that a lot of people recommend on TFP today. The water looks cloudy blueish green. It was very green when I first took the cover off (about 2 weeks ago). We used a opening kit from a pool store which got rid of most of the...

I the model number is SP1615Z1BE which I believe is a single speed motor

Thanks for responding. Im not sure if its variable speed. Would this be manually controlled by a switch or internally by the pump? I cannot find any switches on the pump

Hi Guys, Bought a new home in November which has an in ground, vinyl pool. Ive been trying to open the pool myself and so far I have had little or no success. I believe the pool was installed in the 70s. Im not sure how new the equipment is but I have the following: D.E. filter made by Jacuzzi...