Search results

He ended up letting me do it how I had planned. He couldn’t find the 1 piece fitting online either. Lol

I’m trying to find out how to convert from the 1-1/2” PVC housing to the 3/4” conduit. All I can find is a 1-1/2” PVC coupling and a 1-1/2” to 3/4” female adaptor to a 3/4” conduit threaded adaptor. see below. Inspector wants one fitting from the PCV pipe to the 3/4” threaded adaptor. I’ve...

Yes I know. We just moved from a house that was a tad deeper than what I'm going with here and the adults never went to that side just the kids. The kids are pretty much grown so this one is for mamma and I

I have two skimmers 2" and the two main drains into 1 run also 2". My thought was to actually turn down the flow on the tanning ledge, and push the stream down ward to the floor. I don't want it always disturbing the service of the water like shown in this picture, and cooling the pool down.

2" from pool and at equipment pad. 1-1/2 return lines.

I'm installing this pool below this spring. I will have 3 main return lines all three on separate runs from the pool equipment pad, and wanted to add an extra 4 inlets on the tanning ledge just to help blow debris off the ledge. My plan for the 4 tanning ledge returns was to run 2 extra lines...

I'm in the process of gathering everything I need to do a DIY Inground pool next spring. In one of the area on the concrete deck that we will be pouring I'm wanting to build a bar a few years down the road. I would like to run the following a 1/2" water line, a 1.5" drain line, and a 1/2"...