Search results

I am having a professional gas company supply all the required materials to make it safe. I have a background in carpentry so I’m being safe. As long as you have the correct parts connecting a gas line is not a difficult task. The issue is I really am not interested in paying for a service call...

Hello, we just upgraded form out 12x24 intex ultra frame to a 15x26 agp, part of the upgrade was to add a propane heater. I am aware it’s the most expensive option for heat but it’s my best option. I’ll be setting up the heater as per manufacturer’s instructions for clearance but there’s...

Thank you, that’s what I was thinking. Appreciate the input.

Well, I’m an idiot and was in abit of a rush while setting up my 12x24 intex tonight. I looked at it now that it’s up and half full and realized I forgot to put down a tarp on top of my sand base. What is everyone’s thoughts do I drain and put a tarp down, or I should be fine? I never have...

Sorry to take so long to get back. That's pretty much how mine started in the photo you posted. The legs came out to about 13'8. So not quite as wide as they were supposed to. I wouldn't be worried about how yours is it should be fine.

They moved about 2" on one side and around 4" on the other. On the short sides they moved pretty evenly about 3" I think but I wasn't watching those sides as much. Hope it helps.

I will take a look when I get back home. I'm at the cabin, but not as much as I thought about 1.5" on one side and 3" on the other. I'll double check on Sunday and re-post.

Thanks for the help.

I had already pushed out the base and the creases before the photo. I think it'll actually come out enough cause when I get in it and push the sides it feels like I'm hitting the black connection that connects the pool to the support and I'm pretty sure you shouldn't feel them when it's full...

Thanks I spent a lot of time levelling it so I wouldn't have these kind of issues. If I pull the support leg out it sits about an inch on the paver. The other side look the same as this side. I'm more worried about this side as I wanted it pretty close to the deck so I can use the deck to get...

Hers a photo for reference. I know that the legs will come out to where the grey holder is atleast but even that's barley on the paver and won't be at the 13'10 it's supposed to be at. No straps on mine it's the rectangular 12'x24'x52".

Just set up my new 12 x 24 rectangular intex. Ground is level within 1/4 inch and the pavers are also all level within 1/4 inch. I have about 2 inches of water in it and the support legs aren't at the 13'10 and 25'10 that they're supposed to be the 13'10 side is barley sitting on my pavers...

Hi there, there are a few threads on it if you do a search I found some doing a search. Fwiw. It looks like it's as simple as ordering the new inlet from amazon (link below) and using the gasket as a guide to make your cuts, cutting out the old inlets and replacing with the Hayward. The only...

Anyone have an opinion on the Hayward eyeball return vs the intex eyeball return? Or if I keep both inlets running with the skimmer? If I do run the puck option rather than the SWG can the puck just be put into a skimmer or do I need to buy a floater?

Thanks for the info. The sand will be to bring up some of the low spots in the middle where I went a little deep with the shovel the perimeter where the blocks go is all level.

Hi all I've been reading the forum and pool school for awhile now and am just going to start my install soon but I have a few questions. I know there's a lot of these type of threads so thanks in advance for the help. My set up is going to be a 12x24x52" intex ultra frame I've levelled the...

Yah I was talking about the Hayward mentioned in the link. I was thinking about running a separate 1500 gph cartridge filter pump for the skimmer which is where I would attach the intex automatic cleaner (i think), does that make sense or would the 1500 gph not run the auto cleaner? Thanks for...

Not trying to threadjack but dosent make sense to me to start a new thread. I just purchased an Intex 24x12x52 Ultra Frame (still sitting in box till spring) that comes with the 2100 gph Intex pump/sandfilter. How much of an upgrade would this combo be compared to the unit the pool comes with...