Search results

  1. Q

    Who do I trust? Me or the pool store?

    Will do. OCLT that is. And I am working on getting CYA up.
  2. Q

    Who do I trust? Me or the pool store?

    I have my FC up to 4. We will see if it holds tonight. SWG seems to be having problems keeping up even though I have 'green' lights steady on my pentair ic20. When I test with the basic taylor test it is usually fine. When I test with the TF100 it is 1 or 2 typically when I read much higher...
  3. Q

    Who do I trust? Me or the pool store?

    Current readings. Taylor test PH 7.5. TFTEST FC = 1. CC = 0. TA 190 CYA 40 ish + Calciium harness 0. Mostly concerned about the PH. I don't know how the pool store could screw that up that much! Water is clear and feels good.
  4. Q

    Who do I trust? Me or the pool store?

    When I test with my taylor "basic" test kit it shows plenty of chlorine - 3 +. PH 7.5. When I test with TF kit, My Free chlorine is usually about one or two and CC trace or none. My TA is about 190, cyn currently about 40 and going up with sock method. Anyway I was going by the pool store...
  5. Q

    First SLAM done - things learned and thanks

    I hope that is true! Here in Missoula, because the pool is closed and winterized for so long, I could have the same problem when opening. I had the same problem last year and I did what the pool store advised. Which was a double ton of tri-chlor. I believe this bumped up my cya level (I think...
  6. Q

    First SLAM done - things learned and thanks

    It is forcast to be over 90 tomorrow. Fortunatly, my pool is crazy clear and everything seems to be good. While all my observations have already been said, you just don't really understand until you do your first SLAM. My pool was clean and clear but eating chlorine. Something was wrong but...
  7. Q

    Getting ready for first SLAM

    AZ girl I did pass! lost 1 FC over night and just a trace of CC. I believe it was largely ammonia but whatever it is / was it is gone. Just waiting for the chlorine to "drift" down. It is taking a bit. Even with sunshine and a pretty full pool. Now I need to work on PH and TA. PH is ok at...
  8. Q

    Getting ready for first SLAM

    Well, I can't figure out how to rotate. Anyway - here is the re-habed pool. Becasue of all the help I received this past week we were able to swim today. My wife is very happy. Which make me happy. Slam went well. Just as advertised.
  9. IMG_0345.JPG

    IMG_0345.JPG

  10. Q

    Getting ready for first SLAM

    I think you are correct. I do suspect I am either VERY close or on top of it now. it is sunny and I have only lost 3.5 fc and cc is lat a trace in about 4 hours. Pool is crystal clear. Again THANK YOU all for encouragement, etc. Pics soon (if I ever get done with the chore list).
  11. Q

    Getting ready for first SLAM

    getting there. Lost 6 PPM last night. from 12 down to 6. CC are holding at a trace .5 or less. I put up to 20 this morning and will see how it goes. Question. At what FC level is it ok to swim? (The weather is going to be great tomorrow - I am hopeful).
  12. Q

    Getting ready for first SLAM

    2.5 hour, I have lost 6 ppm. FC 14, CC .5. Hope test is good tomorrow. Thanks again everyone for your assistance.
  13. Q

    Getting ready for first SLAM

    So, after an hour and half I have lost 3 ppm chlorine. FC 17, CC .5. Getting there. Still going through chlorine pretty fast but slowing down.
  14. Q

    Getting ready for first SLAM

    Will do. Work has been getting in the way... so, 3:30 (after bumping to 20 ppm @ 11:30) FC9.5, CC .5. I should be able to check at a minimum every two hours for a bit. So chlorine is still going fast but the cc seems to moving down.
  15. Q

    Getting ready for first SLAM

    11:30 - FC = 3 CC= 1. Close I hope.
  16. Q

    Getting ready for first SLAM

    Thanks everyone! I don't have any visable algae - suspect amonia. but going through chlorine fast. However, there is some progress. Home from work to test and add shortly.
  17. Q

    Getting ready for first SLAM

    Re: Getting ready for first SLAM (Day 2) Morning test - 5:30 AM. FC = 1 CC 2.5. Progress I think.
  18. Q

    Getting ready for first SLAM

    When I came back from adding chlorine, test turned pink again (it had sat for 10 min ) and took two drops to make it clear. So, 3.5 cc probably. Interesting.
  19. Q

    Getting ready for first SLAM

    better! 10:20 - 8 fc 2.5 cc. tomorrow.... if pool makes it through the night!
  20. Q

    Getting ready for first SLAM

    Dates are all either 15 or 16. Possibly testing error. I will be testing again in an hour and more will be known. Thanks for assistance!
  21. Q

    Getting ready for first SLAM

    8:45 - just over one hour. 5.5 fc 4 cc. cc is not moving and chlorine is getting used faster! More in a hour or so.
  22. Q

    Getting ready for first SLAM

    Start of Slam tonight. After two hours FC fell from 16 to 8. CC 4. CYA 40 ish. 70 degree pool. added another gal of chlorine to get up to 16. we will see what it after two hours and then again in the morning!
  23. Q

    Getting ready for first SLAM

    Thank you BoDarville. I also have a Teledyne Laars Series One Heater. I hope it lasts a few more years. I suspect it is very old. Starting SLAM this evening.
  24. Q

    Getting ready for first SLAM

    Thank you! Should I just remove the sock with cya in it for now?
  25. Q

    Getting ready for first SLAM

    My regular pool guys quit - so I figured this is a good time to figure things out myself. Meg and Dave from TFTestkits have been amazing and amazingly helpful. Anyway - my most recent tests: FC 0 PH 7.2 CYA 40 or so - trying to get up to 60 or so TA 120ish 70 degrees I suspect I have some...
  26. Q

    New to trouble free pool - gpm question

    I will get some pictures up in the next few days. It is a CRAZY plumbing job for sure with lots of right angles. Runs to the pool are not too long. I will attempt to measure tonight. thank you. QQQ
  27. Q

    New to trouble free pool - gpm question

    Old pump was a 1hp marlow and psi was about 18 psi. Old pool store thought 1/2 hp would be plenty.
  28. Q

    New to trouble free pool - gpm question

    Thanks for response! Pentair superflo vs. swg does not have a bypass and is after the sand filter. Swg just starts at about 1750. Psi at 1750 is about 8 and at 2500 about 15. I have not check at highest speed. I agree 1750 seems high for 20 gpm
  29. Q

    New to trouble free pool - gpm question

    So far so good! My wife and I have been rehabbing an old patio pool that came with house. We have been updating a bit each year. 4 th summer This year we put in a 115 volt vs pump. I wanted a timer and it just made sense to put in a vs. next year I will probably put a flow guage in. My swg will...
  30. Q

    What is your swim season?

    Mid June to first week in September typically.