Search results

my kit only goes to 10, I will order the TF100

Correction, Taylor K-2004B Results: (Keep in mind I just added 1/2 gal of 8.25% bleach) Water Temp - 84 FC - > 10 TC - > 10 CC - > 10 Ph - 7.8 TA - 40 CH - 10 CY - 30

I have the Taylor K-2005, in another thread I posted my levels. but I will go pull them now and post them here.

Greetings to the all knowing of TFP. My pool is doing great but with one problem. As you can tell in my signature block I have an Intex 16'x48" AGP. with Intex SWG. I can't keep the chlorine levels up about 5 or 7. they keep dropping off. Do I need to add some sort of stabilizer to the...

anyone got any comments on the Chemical levels? am I on the right track or did I 'dive' into the deep end?

Oh and yesterday I threw in a gallon of clorox this way I didn't have to run the swg in boost mode. We had rain and I hadn't had the swg running. So I kicked up the chlorine levels Be nice. not a thumb typer sent from my phone. :)

Ok folks. Figured new month time to start keeping a log of the pool and chems. Here is today's readings. This is done with a Taylor K-2004 kit 0945am Water temp is 74° FC - > 10 TC - > 10 CC -> 10 PH - 7.8 TA - 40 CA - 30 CH - 10 Looks nice and pretty And you see my newly finished deck...

I would put down some sand and then a tarp, but that is my $.02 worth, mine sits on 16"x16" patio pavers (Deck doubled as a basketball area in the 'off-season' but have left pool up for 3 seasons yeah yeah I know) but this fall taking down pool, will rip up the pavers and relocate them to...

Rich, here is another thought on filling it back up. if the town you are in has a Volunteer Fire Department, you could possibly ask them if they can help fill it for you. Some towns will allow them to do this, they call it 'pump training' and something about filling up a pool with a 5" supply...

thanks for all the replies. It cemented what I was thinking, a bunch of hogwash/dirty water. LOL

and what's funny, is on their door, they had a sale on 25# of chlorine. I do have to admit, most pool places make their $$$$ on chems. not me, with help from TFP and my SWG, I am nice and crystal clear! :scratch: now to get the TF-100 kit :)

ah, that makes total sense. Their big product they were pushing for SW pools I want to say was Simple-Salt. Below is a snippit from the website. and I don't believe it one bit! <snip> The Simple Salt System offers such advanced technology that it is truly a low-maintenance system; set it...

That is what I thought, and with the newer pools, they are more of a resin construction instead of the old metal. It was probably just the pool place trying to make more money on a fiberglass IGP. I won't be going back to this place at all, only thing I needed them for was my new access ladder...

another thought if you have a Intex Knock-Off like the ultra-Frame pools, go get yourself some of the 1'x1' bricks from either Home Depot/Lowes/Menards etc, and place that under each leg, will give a solid surface for your legs and possibly prevent the sinking issue you are having. Don't give...

Just wanted to throw this out to the masses and see what sticks. I was in a pool place yesterday and asked some questions about 'real' salt-water systems. ie. Hayward Aqua-Trol etc.. they (Pool Place) said that it isn't recommended for vinyl lined pools, salt-water systems are usually for...

Looking more at your BBQ Island. is what i was asking.

I would really like to know your plans/diagrams of your project. It is amazing and it is exactly what I am looking to do in my backyard

well I have the large sand filter from Hayward, my pressure hasn't really gone up since I have collected all the 'junk' it is a 300# filter so it will take some time. But when I do backwash, it would be for like 2-3 minutes tops. you might try the rinse gig with your filter,

I just used the teflon tape, yes the white tape on the blue spool. I did at least 3 or 4 turns around the threads to ensure a good seal - - - Updated - - - it could be with all the **** we had with the rain and your bradford's, it could have just gotten dirty. I know my Hayward is still...

Hey Beens, did you try any Teflon tape on your fittings? when I did my 'hard' plumbing at the pool point, all my fittings have teflon tape on them.

well now start a bonfire and have a cold one and enjoy, you WILL get this.

how is it coming Beens? success? :confused:

Re: Intex Pool Owners Who Have Upgraded Theirs have no fear Beens, you will get it all behind you and then you can also be called a expert then :) I have faith. - - - Updated - - - and to update your signature, just go in to settings at the top of the page, and then you will have an option...

is the leak (steady flow) coming from the top of your filter/strainer?

Re: Intex Pool Owners Who Have Upgraded Theirs rlehnig, please add to your signature the equipment you have, gallons, etc. and welcome to TFP!

Beens: You can do it, yes there is some frustration, but in the end it will all be worth it. Now for it to warm up again. With all the rain this week I have to dump water out of my pool It is at the top of my new skimmer and it is ineffective for getting all the c r a p off the surface...

Beens: You can do it, yes there is some frustration, but in the end it will all be worth it. Now for it to warm up again. With all the rain this week I have to dump water out of my pool It is at the top of my new skimmer and it is ineffective for getting all the c r a p off the surface...

of course, that being 2 1/2 hours later :)

Beens. You could do what I did and do the 90° elbow at the return get a ball valve and then put your hose fitting on the ball valve going down. You could use flex pvc pipe from there to ur pump do u have the Hayward skimmer too? Sent from my SCH-I545 using Tapatalk

Now it is time to have a beer and relax. My nightmare today was my irrigation system. Found out that my feeder power for the pump which should be 22nd is now 110. Ghetto engineering here I come. To overcome the power prob use my generator!!!!! Hahahahaha Sent from my SCH-I545 using Tapatalk